Fraction Conversion Chart

Back to Search Result   Back to Listing   

Fraction

Decimal Value

Fraction

Decimal Value

Fraction

Decimal Value

1/64

0.015625

11/32

0.34375

43/64

0.671875

1/32

0.03125

23/64

0.359375

11/16

0.6875

3/64

0.046875

3/8

0.375

45/64

0.703125

1/16

0.0625

25/64

0.390625

23/32

0.71875

5/64

0.078125

13/32

0.40625

47/64

0.734375

3/32

0.09375

27/64

0.421875

3/4

0.75

7/64

0.109375

7/16

0.4375

49/64

0.765625

1/8

0.125

29/64

0.453125

25/32

0.78125

9/64

0.140625

15/32

0.46875

51/64

0.796875

5/32

0.15625

31/64

0.484375

13/16

0.8125

11/64

0.171875

1/2

0.5

53/64

0.828125

3/16

0.1875

33/64

0.515625

27/32

0.84375

13/64

0.203125

17/32

0.53125

55/64

0.859375

7/32

0.21875

35/64

0.546875

7/8

0.875

15/64

0.234375

9/16

0.5625

57/64

0.890625

1/4

0.25

37/64

0.578125

29/32

0.90625

17/64

0.265625

19/32

0.59375

59/64

0.921875

9/32

0.28125

39/64

0.609375

15/16

0.9375

19/64

0.296875

5/8

0.625

61/64

0.953125

5/16

0.3125

41/64

0.640625

31/32

0.96875

21/64

0.328125

21/32

0.65625

63/64

0.984375

Note: This Technical Data is taken from various Technical Books & is only as an advise to users. Users are requested to take proper guidance before basing any technical calculation on the above technical data. Mtlexs.com, or its Promoter, Directors, employees will in no way be responsible for any losses, damage etc. in any manner whatsoever.
Conversion Table Inches to Millimetres
Conversion Table For Gauges to inches & mm
Wrought Copper and Copper Alloys for general Engineering and Electrical Purposes
Weights of Brass, Copper, Phosphor bronze and Zinc sheets.
Compatible Technical Specifications - (BS / ASTM / DIN / JIS / IS) for Various Copper and Copper Alloy Tubes
Classification of Non-ferrous metals as per periodic table of elements
Metals Discoverer and Nationality
Industrial classification of metals
Hardness Conversion Table
ISRI Specifications for Metal Scrap & Bullion
Conversion Table of all Technical Terms / Scientific Specifications Alphabetically
Copper and Alloy Specification as per ASTM standards
Nominal Compositions
Mechanical Properties of Heat Exchanger and Condenser Tubes
Mechanical Properties at High Temperature Heat Exchanger and Condenser Tubes


View Technical Specifications for   :   [  Copper ]    [  Brass ]    [  Cupro Nickel ]    [  Aluminium ]    [  Zinc ]    [  Lead ]    [ ASTM Standards ]

At Mtlexs.com, we cannot make any specific recommendations about the suitability of a given alloy, temper, or shape for your project or application. All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled from sources we believe to be accurate but cannot guarantee. WE CAN NOT BE HELD RESPONSIBLE FOR ANY SUCH TECHNICAL FAILURE.