Mechanical Properties of Heat Exchanger and Condenser Tubes

Back to Search Result   Back to Listing   
Standard nos. and alloy nos.   Tensile Strength N/mm2 (MPa) Yield Strength N/mm2 (MPa) Elongation % Hardness Hv 5kg Flattening Test Expansion Test Mercurous nitrate or ammonia vapor test Grain Size
Aluminum Brass
JIS H3300 C6872T-O   375   40   O O O 0.010-0-045
ASTM B111-C68700Ann.   345 125     O O O 0.010-0.045
ASME SB111-C68700Ann.   345 125     O O O 0.010-0.045
DIN 1785 F34 340 120-180 55   O O O 0.010-0.050
CuZn20Al2 F39 390 150-230 45   O O O 0.010-0.050
BS 2871 CZ110 TA       85-110 O O O 0.05
  O       75 O O O  
Admiralty Brass
JIS H3300 C4430T-O   315   30   O O O 0.010-0.045
ASTM B111-C44300Ann.   310 105     O O O 0.010-0.045
ASME SB111-C44300Ann.   310 105     O O O 0.010-0.045
DIN 1785 F32 320 100-170 55   O O O 0.010-0.050
CuZn28Sn1 F36 360 140-220 45   O O O 0.010-0.050
BS 2871 CZ111 TA       80-105 O O O 0.05
  O       75 O O O  
Copper-Nickel
JIS H3300 C7060T-O   275   30   O O   0.010-0.045
ASTM B111-C70600Ann.   275 105     O O   0.010-0.045
ASME SB111-C70600Ann.   275 105     O O    
DIN 1785 F29 290 90-180 30   O O   0.01-0.05
CuNi10Fe1Mn                  
BS 2871 CN102 O       80-110 O O O 0.05
JIS H3300 C7150T-O   365   30   O O   0.010-0.045
ASTM B111-C71500Ann.   360 125     O O   0.010-0.045
ASME SB111-C71500Ann.   360 125     O O   0.010-0.045
DIN 1785                           CuNi30Mn1Fe F37 370 120-220 35   O O   0.01-0.050
BS 2871 CN107 O       90-120 O O O 0.05
JIS H3300 C7164T-O   430   30   O O   0.010-0.045
ASTM B111-C71640Ann.   435 170     O O   0.010-0.045
DIN 1785                           CuNi30Fe2Mn2 F42 420 150-260 30   O O   0.01-0.05
BS 2871 CN108 O       90-120 O O O 0.05
Note: This Technical Data is taken from various Technical Books & is only as an advise to users. Users are requested to take proper guidance before basing any technical calculation on the above technical data. Mtlexs.com, or its Promoter, Directors, employees will in no way be responsible for any losses, damage etc. in any manner whatsoever.
Conversion Table Inches to Millimetres
Conversion Table For Gauges to inches & mm
Wrought Copper and Copper Alloys for general Engineering and Electrical Purposes
Weights of Brass, Copper, Phosphor bronze and Zinc sheets.
Compatible Technical Specifications - (BS / ASTM / DIN / JIS / IS) for Various Copper and Copper Alloy Tubes
Classification of Non-ferrous metals as per periodic table of elements
Metals Discoverer and Nationality
Industrial classification of metals
Fraction Conversion Chart
Hardness Conversion Table
ISRI Specifications for Metal Scrap & Bullion
Conversion Table of all Technical Terms / Scientific Specifications Alphabetically
Copper and Alloy Specification as per ASTM standards
Nominal Compositions
Mechanical Properties at High Temperature Heat Exchanger and Condenser Tubes


View Technical Specifications for   :   [  Copper ]    [  Brass ]    [  Cupro Nickel ]    [  Aluminium ]    [  Zinc ]    [  Lead ]    [ ASTM Standards ]

At Mtlexs.com, we cannot make any specific recommendations about the suitability of a given alloy, temper, or shape for your project or application. All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled from sources we believe to be accurate but cannot guarantee. WE CAN NOT BE HELD RESPONSIBLE FOR ANY SUCH TECHNICAL FAILURE.