Mechanical Properties at High Temperature Heat Exchanger and Condenser Tubes

Back to Search Result   Back to Listing   
Test temperatures C 0.2% Yield strength N/mm2 Tensile strength N/mm2 Elongation % Reduction of area  %
Aluminum brass
R.T. 246 455 39 65
100 234 437 37 63
200 223 410 39 60
300 209 333 26 30
400 129 279 22 23
500 71 157 30 30
90/10 Copper-Nickel (ann.)
R.T. 106 312 45 78
200 89 268 35 78
300 85 258 32 61
400 86 237 30 60
550 79 150 41 40
80/20 Copper-Nickel (ann.)
R.T. 121 329 44 81
200 105 284 38 80
300 90 270 35 76
400 92 250 31 56
550 88 160 17 15
70/30 Copper-Nickel (ann.)
R.T. 144 366 41 75
200 126 318 37 73
300 119 287 35 65
400 104 243 19 15
550 93 175 16 15
Note: This Technical Data is taken from various Technical Books & is only as an advise to users. Users are requested to take proper guidance before basing any technical calculation on the above technical data. Mtlexs.com, or its Promoter, Directors, employees will in no way be responsible for any losses, damage etc. in any manner whatsoever.
Conversion Table Inches to Millimetres
Conversion Table For Gauges to inches & mm
Wrought Copper and Copper Alloys for general Engineering and Electrical Purposes
Weights of Brass, Copper, Phosphor bronze and Zinc sheets.
Compatible Technical Specifications - (BS / ASTM / DIN / JIS / IS) for Various Copper and Copper Alloy Tubes
Classification of Non-ferrous metals as per periodic table of elements
Metals Discoverer and Nationality
Industrial classification of metals
Fraction Conversion Chart
Hardness Conversion Table
ISRI Specifications for Metal Scrap & Bullion
Conversion Table of all Technical Terms / Scientific Specifications Alphabetically
Copper and Alloy Specification as per ASTM standards
Nominal Compositions
Mechanical Properties of Heat Exchanger and Condenser Tubes


View Technical Specifications for   :   [  Copper ]    [  Brass ]    [  Cupro Nickel ]    [  Aluminium ]    [  Zinc ]    [  Lead ]    [ ASTM Standards ]

At Mtlexs.com, we cannot make any specific recommendations about the suitability of a given alloy, temper, or shape for your project or application. All technical data is for comparison purposes only and is NOT FOR DESIGN. It has been compiled from sources we believe to be accurate but cannot guarantee. WE CAN NOT BE HELD RESPONSIBLE FOR ANY SUCH TECHNICAL FAILURE.